Use your own Credit Card Company
Internet is Not Required for Operation
CUSTOMER POLE DISPLAY SETUP
Setting Up a Pole Display:
Pole display installation is set up just like a printer. Using the Windows Control Panel add a Text Only Generic Printer and name it "Pole Display" or any other name you like. Configure the port on the Text Only Generic Printer to match the Pole Display's Serial Port Number. Test the Pole display through the Plexis POS interface by choosing from the Main System Menu Utilities, Hardware Diagnostics then Pole Display. Once tested choose Save.
USB Pole Displays:
You must install the USB Drivers from Manufacturer First.
The USB Driver will assign a "Virtual COMM Port". You must remember what port the USB Driver
is using. After verifying the pole display is working properly with the USB driver then install
the Generic Printer Driver as described above, then assign the "Virtual COMM Port" number
previously configured by the USB Driver.
Supported Command Sets:
AEDEX, Partnertech, Epson, Ultimate
Your pole display must be able to use supported driver emulation or it may not function.
Consult with your hardware vendor for more details on command set emulation.
Plexis Software Systems does not sell or support computer systems, networks POS Peripherals or any other hardware.
We can provide support for our software applications only.
POS Hardware Suggestion List (click here)
Downloads and Upgrades
Restaurant POS Software | Pizza POS Software | Coffee Shop POS Software
Grocery Store POS Software | Convenience Store POS Software
Retail POS Software | Liquor Store POS Software
Cafe and Deli POS Software | EBT / Snap and Food Stamp POS Software
Frequently Asked Questions
Our 30 Day Refund Policy