POS Software for Restaurant, Retail, Pizza, Liquor Store, Grocery and Delivery
Plexis Point of Sale Software
CALL 1-800-883-0814
11:00am to 7:00pm Monday - Friday, Eastern
PAX S300 PIN PAD TERMINAL SETUP

Prerequisites:
The PAX S300 must be obtained by one of our approved vendors.
Terminals supplied by a non-approved Processor, ISO or Vendor will not interface.
The end processor must be First Data or TSYS.

Default Settings:
Main Communication LAN
Backup Communication Dial
Maximum Tries 1
Connect Timeout 300
Lan Type Static
Subnet Mask 255.255.255.000
IP Address ex: 192.168.192.177
Gateway IP ex: 192.168.192.1
DNS IP ex: 192.168.192.1
ECR CommType Ethernet
Communications Port 10009
Communication Protocol HTTP GET
 
Plexis POS Supports fully integrated Credit Card, Debit Card, EBT / SNAP Food Stamps and EBT Cash Benefits.

Print outs are sent to your standard receipt printer and there is no need to purchase seperate Credit Card Terminal printer paper.

The S300 supports Contactless Capture, e-Signature, Magnetic Stripe, Chip & PIN. EMV & PCI Compliant.
(download spec sheet)

Get your Free PAX S300 Terminal Here
Credit Card Processing Terminal compatible with Plexis POS, Supplied by Retech Payment Systems
* with your new merchant account

Detailed Instructions:

Enter the setup mode by holding the FUNC key down and press the "1" key.
Enter the password which is todays date (MMDDYYYY) and press the Green Arrow Key.
Choose the Down Arrow on the Terminal's Touch Screen, then Choose Communication.
You may be prompted to re-enter the password.

Choose Main Communication.

Set / Verify the following settings:
Main Communication = LAN
Backup Communication = Dial
Maximum Tries = 1
Connect Timeout = 300

Press the Down Arrow on the Terminal's Touch Screen, then Choose LAN Parameters.

Lan Type = Static
Subnet Mask = 255.255.255.000
IP Address = (Choose an unused IP Address on your LAN (ex: 192.168.192.177
Gateway IP = (Choose your primary gateway starting address (ex: 192.168.192.1)

Press the Down Arrow on the Terminal's Touch Screen, then Choose DNS IP.

DNS IP = (ex: 192.168.192.1)

Press the Green Arrow Key

Press the Back Key on the Terminal's Touch Screen so the terminal is at Communication options.

Press the Down Arrow on the Terminal's Touch Screen until you see ECR Comm Type.

Select ECR Comm Type.
ECR CommType = Ethernet
Communications Port = 10009

Press the Green Arrow Key

Communication Protocol = HTTP GET

Router / Firewall Settings:
If you are connecting your PAX S300 terminal through a router you will need to set Port Forwarding up for EACH terminal connected to the router.

Additional Resources:

PAX S300 User Guide (pdf)
Port Forwarding Example:
Port forwrding example for a router


Demo Download

Downloads and Updates

Price List

Our 30 Day Refund Policy

About us
Industries Supported:
Restaurant POS Software | Pizza POS Software | Coffee Shop POS Software
Grocery Store POS Software | Convenience Store POS Software
Retail POS Software | Liquor Store POS Software
Cafe and Deli POS Software | EBT / Snap and Foood Stamp POS Software

Features

Screen Samples

Frequently Asked Questions

Help Center

Contact us